Home

How to Choose Bathroom Vanities 

Posted by on 12:00 am in Uncategorized | 0 comments

If you’re installing bathroom vanities in your newly constructed house, you’ll find out that you have several materials to choose from. It’s very important that you make the right choice when it comes to these things, especially if you would like to make the bathroom the most comfortable part of your home. Doing so will also add a lot to your home’s market value. 

 Marble

One of the basic things that you need is to decide upon are the cabinets. If you have installed painted bathroom vanities, your choices may include medium density fiberboard, plywood, and solid wood. Which one should you use? Here’s a guide to choosing bathroom vanities that’s just right for the space that you have.  

How to Choose Bathroom Cabinets 

If you’re looking to add painted cabinets to your bathroom, those three materials are all great choices. When installing cabinets, you must pay extra attention to the door panels because those are the things that you’ll first when you step inside. The best choice would be hardwood plywood with close grains, such as birch plywood or the solid hardwood types, such as maple. Birchwood is also ideal for use on shelves, tall drawers, and cabinet sides. On the other hand, maple works best on small drawers, cabinet face frames, and door frames. 

Medium Density Fiberboard or MDF can be used for painted cabinetry as well but unfortunately, it won’t last as long as hardwood due to is lower resistance to the moisture and high humidity conditions in bathrooms. They would shrink and expand due to the changes in the humidity, which will cause the paint to crack.  

Whatever material you use for your vanities, the most important thing is installing a good-sized exhaust fan for the bathroom. It has to be properly vented to the outside in order to remove any moisture forming inside the bathroom. You should run the exhaust fan when you’re using the bathroom and until 20 minutes after.   

How to Choose Bathroom Vent Fans 

When choosing bathroom vent fans, an important consideration is the size of your bathroom. These fans move air on a certain rating measured by cubic feet per minute. The idea is to get them to change the air inside the bathroom eight times in an hour. Bathrooms that have an 8-inch ceiling then the rating for your vent fan must be similar to the area of the room measured in square feet. For this instance, a 50 CFM bathroom vent fan would work. But if your bathroom higher ceiling is higher than 8 inches, you would need a much larger fan.  

You’d actually benefit from installing bigger fans because they can remove moisture in the air when you’re showering. Use those with a rating of 80 to 110 CFM. It would also help if there’s at least a 5/8-inch gap under the bathroom door to let fresh air to enter the bathroom even if the door is closed. As a rule of thumb, a bathroom with higher ceilings would need a bathroom vent fan with at least 200 CFM rating. 

Things to do Before you Build a Pool in your Lawn

Posted by on 4:21 am in Uncategorized | 0 comments

Swimming pools are structures in the yard that has many benefits, it will allow your family to bond more, the health benefits are also a lot. That is why there are some families who opt to have a swimming pool instead. If you are building a pool from the ground up then here are some reminders you should do to make the building process a lot easier.

The list of things below are in no certain order, but be sure to read it throughout you may be able to avoid any kind of disaster if you know what to do. When you do decide to take a plunge in building a pool, there is no construction shortcut to this. You’ll have to do the job properly to avoid any nightmares along the way.

  1. The lay of the land should be cleared.

Before any excavation starts make sure to ask a contractor to clear the area wherein you plan to build the pool. That will include all the trees that is in there and other plants. You can call a tree removal service to ensure that the job is well done and that there are no accidents waiting to happen, if you need a stump grinding they can do that too.

  1. Check the laws and ask permission from the homeowners association.

You don’t want to put a damper on the process of pool building before you can take the plunge in the water of your yard pool. To avoid this always check the zoning laws and talk to the homeowners association about your plans. It is going to be a permanent thing in the ground and you need to follow rules if you don’t want another nightmare coming to life.

  1. No shortcuts with Contractors

When hiring contractors to work for you it is important to make sure that you are very thorough in the decision of who will work for you. Get references for each one and talk to this people, do your research and be sure that they can deliver the project to you over your expectation. Don’t hire a contractor just because they are cheap you may save money now but you will lose more later.

  1. Materials should be high quality

When you take the plunge of a swimming pool in your yard. You should expect that the initial cost for such a project will be big. If that is so, don’t put to waste your investment by going for substandard materials because it is cheaper. Instead go for the high qualities one that you can be sure will last you long. That way you can say well that is an investment well invested.

When you make a decision this big for you, you should go all out instead of going at it halfway. Deal with it like a responsible adult and make sure that the project will come out excellent. Don’t leave anything to chance if you don’t want to regret it in the end.